The Berger VLD Hunting Rifle Bullet is one of the flattest shooting hunting Rifle Bullets in the industry. VLD Hunting Rifle Bullets are identical in design to VLD Target Rifle Bullets except utilize a thinner J4 Precision jacket for rapid expansion during game applications. VLD Hunting bullets are designed to penetrate 2-3″ into the vitals and then begin to expand and create a massive wound cavity up to 15″. This delivers maximum organ/tissue damage and extreme hydrostatic shock aiding in an ethical kill. VLD Hunting Rifle Bullets incoporate a secant ogive design which allows the Rifle Bullet to experience less drag as it travels to the target. This reduced drag is why the VLD shoots flatter, experiences less wind-drift, and has a higher retained velocity than all others. A favorite load technique for the VLD’s is touching the rifling for single-shot applications, although some rifles may prefer as much as .150″ from the rifling. Berger VLD Hunting Rifle Bullets are extremely popular for long range hunting applications. Built with highly consistent J4 Precision Rifle Bullet jackets, most favored by custom Rifle Bullet makers.
7 mm 168 Grain Very Low Drag (VLD) Hunting Rifle Bullet
VLD Hunting Features
Secant OgiveBerger VLD (Vey Low Drag) Bullets use a Secant Ogive, which is an aggressive ogive shape that provides a reduced drag factor. The Secant Ogive is proven to be the most efficient shape for external ballistic performance, resulting in flatter shooting with less wind drift.
Consistent CoreOur exacting core manufacturing process is one of the reasons when you buy a box of Berger, you don’t have to worry about sorting by weight. This gives you more reliable drop, consistent BC, and better accuracy.
Boat TailBoat Tail bullets provide an aerodynamic advantage at longer ranges over their flat base counterparts, especially while transitioning from transonic to subsonic velocities.
J4 Hunting JacketJ4 Precision Bullet Jackets are the #1 choice of custom bullet manufacturers. They are the most consistent and concentric copper jackets in the world holding an unprecedented +/- .0003” tolerance. J4 hunting jackets are produced slightly thinner to allow for 2-3″” of penetration before rapidly expanding, producing extreme hydrostatic shock and a massive wound cavity.
|100ct Part #||
|100ct Box Weight||
|100ct Box Dimensions||
3.4 x 3.4 x 1.7
|G7 Form Factor||
|Minimum Twist (or faster)||
J4 Hunting Jacket
|Base to Ogive||
|Boat Tail Length||
All product specifications are for reference only. Individual lots may vary.
Share This Page: